Netgear DG834G DG834Gv4 Reference Manual - Page 101
Hash Alg, SHA-1, Encapsulation, Tunnel, Authentication Protocol AH, Start, ping -t 192.168.3.1
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
ADSL2+ Modem Wireless Router DG834G Reference Manual f. In the Hash Alg drop-down list, select SHA-1. g. In the Encapsulation drop-down list, select Tunnel. h. Leave the Authentication Protocol (AH) check box cleared. 7. Save the VPN Client Settings. In the Security Policy Editor window, select File > Save. After you have configured and saved the VPN client information, your PC automatically opens the VPN connection when you attempt to access any IP addresses in the range of the remote VPN router's LAN. 8. Check the VPN connection. To check the VPN Connection, you can initiate a request from the remote PC to the DG834G v4 modem router's network by using the Connect option in the NETGEAR ProSafe menu bar. The NETGEAR ProSafe client reports the results of the attempt to connect. Since the remote PC has a dynamically assigned WAN IP address, it must initiate the request. To perform a ping test using our example, start from the remote PC: a. Establish an Internet connection from the PC. b. On the Windows taskbar, click the Start button, and then click Run. c. Type ping -t 192.168.3.1, and then click OK. Figure 6-15 Virtual Private Networking v2.0, September 2007 6-15