Netgear DG834G DG834Gv4 Reference Manual - Page 121
Table 6-5., VPN-Auto Policy Screen Settings, continued
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
ADSL2+ Modem Wireless Router DG834G Reference Manual Table 6-5. VPN-Auto Policy Screen Settings (continued) Fields and Settings Description Remote LAN IP Address The remote VPN endpoint must have these IP addresses entered as its Local Single/Start IP Address addresses. Finish IP Address Single PC - no Subnet. Select this option if there is no LAN (only a single PC) at the remote endpoint. If this option is selected, no additional data is required. The typical application is a PC running the VPN client at the remote end. • Enter an IP address that is on the remote LAN. You can use this setting when you want to access a server on the remote LAN. • For a range of addresses, enter the starting IP address. This must be an address range used on the remote LAN. • Any. Any outgoing traffic from the Local IP computers will trigger an attempted VPN connection to the remote VPN endpoint. Please be sure you want this option before selecting it. Enter the finish IP address for a range of addresses. This must be an address range used on the remote LAN. Subnet Mask Enter the network mask. IKE Direction This setting is used when determining if the IKE policy matches the current traffic. Select an option. • Responder only. Incoming connections are allowed, but outgoing connections are blocked. • Initiator and Responder. Both incoming and outgoing connections are allowed. Exchange Mode Ensure that the remote VPN endpoint is set to use Main Mode. Diffie-Hellman (DH) Group The Diffie-Hellman algorithm is used when exchanging keys. The DH Group setting determines the number of bit size used in the exchange. This value must match the value used on the remote VPN gateway. Local Identity Type Select an option to match the Remote Identity Type setting on the remote VPN endpoint. • WAN IP Address. Your Internet IP address. • Fully Qualified Domain Name. Your domain name. • Fully Qualified User Name. Your name, e-mail address, or other ID. Local Identity Data Enter the data for the local identity type that you selected. (If WAN IP Address is selected, no input is required.) Remote Identity Type Select the desired option to match the Local Identity Type setting on the remote VPN endpoint. • IP Address. The Internet IP address of the remote VPN endpoint. • Fully Qualified Domain Name. The domain name of the remote VPN endpoint. • Fully Qualified User Name. The name, E-mail address, or other ID of the remote VPN endpoint. Remote Identity Enter the data for the remote identity type that you selected. If IP Data Address is selected, no input is required. Virtual Private Networking v2.0, September 2007 6-35