Netgear DG834G DG834Gv4 Reference Manual - Page 148
DG834G v4 with FQDN to FVL328, Configuration Profile
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
ADSL2+ Modem Wireless Router DG834G Reference Manual DG834G v4 with FQDN to FVL328 This section is a case study on how to configure a VPN tunnel from a NETGEAR DG834G v4 to a FVL328 using a fully qualified domain name (FQDN) to resolve the public address of one or both routers. This case study follows the VPN Consortium interoperability profile guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html). Configuration Profile The configuration in this section follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify that the firmware is up to date, and that you have all the addresses that will be necessary, and all of the parameters that need to be set on both sides. Check that there are no firewall restrictions. Table B-2. Profile Summary VPN Consortium Scenario: Type of VPN Security Scheme: IP Addressing: NETGEAR-Gateway A NETGEAR-Gateway B Scenario 1 LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway) IKE with Preshared Secret/Key (not Certificate-based) Fully Qualified Domain Name (FQDN) FDQN 10.5.6.0/24 LAN IP 10.5.6.1 VPNC Example Network Interface Addressing Gateway A WAN IP WAN IP Gateway B dg834g.dyndns.org DG834G (FQDN) fvl328.dyndns.org (FQDN) FVL328 172.23.9.0/24 LAN IP 172.23.9.1 Figure B-6 B-6 NETGEAR VPN Configuration v2.0, September 2007