Netgear DG834G DG834Gv4 Reference Manual - Page 115
Refresh, Clear Log, VPN Status, Policy Name, Remote Endpoint, Action, Connect, SLifeTime Secs
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
ADSL2+ Modem Wireless Router DG834G Reference Manual This log shows the details of recent VPN activity, including the building of the VPN tunnel. If there is a problem with the VPN tunnel, refer to the log for information about what might be the cause of the problem. • Click Refresh to see the most recent entries. • Click Clear Log to delete all log entries. 3. On the VPN Status/Log screen, click VPN Status to display the Current VPN Tunnels (SAs) screen. Figure 6-35 This table lists the following data for each active VPN tunnel. • SPI. Each SA has a unique SPI (Security Parameter Index) for traffic in each direction. For manual key exchange, the SPI is specified in the policy definition. For automatic key exchange, the SPI is generated by the IKE protocol. • Policy Name. The VPN policy associated with this SA. • Remote Endpoint. The IP address on the remote VPN endpoint. • Action. Either a Drop or a Connect button. • SLifeTime (Secs). The remaining soft lifetime for this SA in seconds. When the soft lifetime becomes 0 (zero), the SA (Security Association) is re-negotiated. • HLifeTime (Secs). The remaining hard lifetime for this SA in seconds. When the hard lifetime becomes 0 (zero), the SA (Security Association) is terminated. (It is re-established if required.) Virtual Private Networking v2.0, September 2007 6-29