Netgear DG834G DG834Gv4 Reference Manual - Page 120
Table 6-5., VPN-Auto Policy Screen Settings, Virtual Private Networking - multiple vpn
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
ADSL2+ Modem Wireless Router DG834G Reference Manual Table 6-5. VPN-Auto Policy Screen Settings Fields and Settings Description General Policy Name Remote VPN Endpoint IKE Keep-alive. Local LAN Subnet Mask The remote Single/Start IP VPN endpoint Address must have these IP addresses entered as its remote addresses. Finish IP Address Enter a unique name to identify this policy. This name is not supplied to the remote VPN endpoint. It is used only to help you manage the policies. • The remote VPN endpoint must have this VPN gateway's address entered as its remote VPN endpoint. • If the remote endpoint has a dynamic IP address, select Dynamic IP address. No address data input is required. You can set up multiple remote dynamic IP policies, but only one such policy can be enabled at a time. Otherwise, select an option (IP address or domain name) and enter the address of the remote VPN endpoint to which you want to connect. • If you want to ensure that a connection is kept open, or, if that is not possible, that it is quickly re-established when disconnected, select this check box. • The ping IP address must be associated with the remote endpoint. The remote LAN address must be used. This IP address will be pinged periodically to generate traffic for the VPN tunnel. The remote keep-alive IP address must be covered by the remote LAN IP range and must correspond to a device that can respond to ping. The range should be made as narrow as possible to meet this objective. Enter the desired network mask. • Enter the IP address for a single address, or the starting address for an address range. A single adress setting is used when you want to make a single server on your LAN available to remote users. A range must be an address range used on your LAN. • Any. The remote VPN endpoint may be at any IP address. For an address range, enter the finish IP address. This must be an address range used on your LAN. 6-34 v2.0, September 2007 Virtual Private Networking