Netgear DG834G DG834Gv4 Reference Manual - Page 113
ping -t 192.168.3.1, Gateway-to-gateway configuration
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
ADSL2+ Modem Wireless Router DG834G Reference Manual c. Type ping -t 192.168.3.1, and then click OK. Running a ping test to the LAN from the PC Figure 6-31 This causes a continuous ping to be sent to the first DG834G v4. Within two minutes, the ping response should change from timed out to reply. Note: You can use Ctrl-C to stop the pinging. Figure 6-32 Once the connection is established, you can open a browser on the PC and enter the LAN IP address of the remote DG834G v4. After a short wait, you should see the login screen of the modem router (unless another PC already has the DG834G v4 management interface open). • Gateway-to-gateway configuration. Test the VPN tunnel by pinging the remote network from a PC attached to the DG834G v4. a. Open a command prompt (for example, Start > Run > cmd). Virtual Private Networking v2.0, September 2007 6-27