Netgear DG834G DG834Gv4 Reference Manual - Page 105

Table 6-4., VPN Tunnel Configuration Worksheet

Page 105 highlights

ADSL2+ Modem Wireless Router DG834G Reference Manual Set the LAN IPs on each DG834G v4 to different subnets and configure each properly for the Internet. The examples below assume the following settings: Table 6-4. VPN Tunnel Configuration Worksheet Connection Name: Pre-Shared Key: Secure Association -- Main Mode or Manual Keys: Perfect Forward Secrecy -- Enabled or Disabled: Encryption Protocol -- DES or 3DES: Authentication Protocol -- MD5 or SHA-1: Diffie-Hellman (DH) Group -- Group 1 or Group 2: Key Life in seconds: IKE Life Time in seconds: VPN Endpoint DG834G v4_A DG834G v4_B Local IPSec ID GW_A GW_B LAN IP Address 192.168.0.1 192.168.3.1 GtoG 12345678 Main Disabled 3DES SHA-1 Group 2 28800 (8 hours) 3600 (1 hour) Subnet Mask FQDN or Gateway IP (WAN IP Address) 255.255.255.0 14.15.16.17 255.255.255.0 22.23.24.25 Note: The LAN IP address ranges of each VPN endpoint must be different. The connection will fail if both are using the NETGEAR default address range of 192.168.0.x. To configure a gateway-to-gateway VPN tunnel using the VPN Wizard: Virtual Private Networking v2.0, September 2007 6-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

ADSL2+ Modem Wireless Router DG834G Reference Manual
Virtual Private Networking
6-19
v2.0, September 2007
Set the LAN IPs on each DG834G v4 to different subnets and configure each properly for the
Internet. The examples below assume the following settings:
To configure a gateway-to-gateway VPN tunnel using the VPN Wizard:
Table 6-4.
VPN Tunnel Configuration Worksheet
Connection Name:
GtoG
Pre-Shared Key:
12345678
Secure Association -- Main Mode or Manual Keys:
Main
Perfect Forward Secrecy -- Enabled or Disabled:
Disabled
Encryption Protocol -- DES or 3DES:
3DES
Authentication Protocol -- MD5 or SHA-1:
SHA-1
Diffie-Hellman (DH) Group -- Group 1 or Group 2:
Group 2
Key Life in seconds:
28800 (8 hours)
IKE Life Time in seconds:
3600 (1 hour)
VPN Endpoint
Local IPSec ID
LAN IP Address
Subnet Mask
FQDN or Gateway IP
(WAN IP Address)
DG834G v4_A
GW_A
192.168.0.1
255.255.255.0
14.15.16.17
DG834G v4_B
GW_B
192.168.3.1
255.255.255.0
22.23.24.25
Note:
The LAN IP address ranges of each VPN endpoint must be different. The
connection will fail if both are using the NETGEAR default address range of
192.168.0.x.