Netgear DG834Gv1 DG834Gv2 Reference Manual - Page 132
Click on VPN Status - repeater
View all Netgear DG834Gv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Reference Manual for the Model Wireless ADSL Firewall Router DG834G 6. Repeat for the DG834G on LAN B and pay special attention to use the following network settings as appropriate. • WAN IP of the remote VPN gateway (e.g., 14.15.16.17) • LAN IP settings of the remote VPN gateway: - IP Address (e.g, 192.168.0.1) - Subnet Mask (e.g., 255.255.255.0) - Preshared Key (e.g., 12345678) 7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps: Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See "Activating a VPN Tunnel" on page 8-27 for information on the other ways. a. Open the DG834G management interface and click on VPN Status to get the VPN Status/ Log screen (Figure 8-28). Figure 8-28: VPN Status/Log Screen b. Click on VPN Status (Figure 8-30) to get the Current VPN Tunnels (SAs) screen (Figure 8-29). Click on Connect for the VPN tunnel you want to activate. 8-26 Virtual Private Networking (Advanced Feature) 202-10006-05, June 2005