Netgear DG834Gv1 DG834Gv2 Reference Manual - Page 31

Reference Manual for the Model Wireless ADSL Firewall Router DG834G Connecting the DG834G to Your LAN This section provides instructions for connecting the DG834G wireless router. Note: The Resource CD included with your router contains an animated Installation Assistant to help you through this procedure. How to Connect the Router There are four steps to connecting your firewall: 1. Install ADSL filters on the phone lines. 2. Connect the router to the ADSL filter. 3. Log in to the router. 4. Connect to the Internet. Follow the steps below to connect your router to your network. Before you begin, locate the ADSL configuration information from your Internet Service Provider (ISP). 1. CONNECT ADSL FILTERS ON THE PHONE LINES. a. You need to install a filter on every telephone or device that shares the same phone number as your ADSL router. Select the filter that came with your router. One-Line Filter Phone Splitter Line Two-Line Filter DSL With Splitter Phone Figure 3-3: ADSL microfilters Note: If you purchased the DG834G in a country where the filter is not included, you must acquire one. b. Two-Line Filter Example. Insert the two-line filter into the phone outlet and connect the phone to the phone line connector (A): Connecting the Router to the Internet 3-5 202-10006-05, June 2005