Netgear DG834Gv1 DG834Gv2 Reference Manual - Page 142

Reference Manual for the Model Wireless ADSL Firewall Router DG834G • Manual Policy-for a Manual Keying setup in which you must specify each phase of the connection, see "Using Manual Policy to Configure VPN Tunnels" on page 8-48. Manual Policy does not use IKE. Rather, you manually enter all the authentication and key parameters. You have more control over the process, however the process is more complex and there are more opportunities for errors or configuration mismatches between your DG834G and the corresponding VPN endpoint gateway or client workstation. Using Auto Policy to Configure VPN Tunnels You need to configure matching VPN settings on both VPN endpoints. The outbound VPN settings on one end must match to the inbound VPN settings on other end, and vice versa. See "Example of Using Auto Policy" on page 8-41 for an example of using Auto Policy. Configuring VPN Network Connection Parameters All VPN tunnels on the DG834G wireless router require configuring several network parameters. This section describes those parameters and how to access them. The most common configuration scenarios will use IKE to manage the authentication and encryption keys. The IKE protocol performs negotiations between the two VPN endpoints to automatically generate and update the required encryption parameters. Click the VPN Policies link of the main menu, and then click the Add Auto Policy button to display the VPN - Auto Policy menu shown in Figure 8-41. 8-36 Virtual Private Networking (Advanced Feature) 202-10006-05, June 2005