Netgear DG834Gv1 DG834Gv2 Reference Manual - Page 152
Click Apply. The Get VPN Policies web is displayed., General, Remote Address Data e.g. - wireless repeater
View all Netgear DG834Gv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Reference Manual for the Model Wireless ADSL Firewall Router DG834G 5. Click Apply. The Get VPN Policies web page is displayed. Figure 8-45: VPN Policies Screen 6. Repeat for the DG834G on LAN B and pay special attention to use the following network settings as appropriate. • General, Remote Address Data (e.g., 14.15.16.17) • Remote LAN, Start IP Address - IP Address (e.g, 192.168.0.1) - Subnet Mask (e.g., 255.255.255.0) - Preshared Key (e.g., 12345678) 7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps: Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See "Activating a VPN Tunnel" on page 8-27 for information on the other ways. a. Open the DG834G management interface and click on VPN Status to display the VPN Status/Log screen (Figure 8-46). 8-46 Virtual Private Networking (Advanced Feature) 202-10006-05, June 2005