Netgear DG834Gv1 DG834Gv2 Reference Manual - Page 27

Chapter 3 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describes how to configure your DG834G Wireless ADSL Firewall Router for Internet access using the Setup Wizard, or how to manually configure your Internet connection. What You Need Before You Begin You need to prepare the following before you can establish an Internet connection through your router: 1. The router connected to an ADSL line and a computer properly connected to the router as explained below. 2. Active Internet service such as that provided by an ADSL account. 3. The Internet Service Provider (ISP) configuration information for your DSL account. Note: If you purchased the DG834G in a country where a microfilter is not included, you must acquire one. ADSL Microfilter Requirements ADSL technology uses the same wires as your telephone service. However, ADSL adds signals to the telephone lines which create noise in the telephone service. You must use ADSL microfilters to filter out these signals before they reach your telephone. ADSL Microfilter Phone Figure 3-1: ADSL microfilter Connecting the Router to the Internet 3-1 202-10006-05, June 2005