Netgear DG834Gv1 DG834Gv2 Reference Manual - Page 141

Reference Manual for the Model Wireless ADSL Firewall Router DG834G Note: When NETBIOS is enabled (which it is in the VPNC defaults implemented by the VPN Wizard), automatic traffic will reactivate the tunnel. To prevent reactivation from happening, either disable NETBIOS or disable the policy for the tunnel (see "Using the Policy Table on the VPN Policies Page to Deactivate a VPN Tunnel" on page 8-32). Deleting a VPN Tunnel To delete a VPN tunnel: 1. Log in to the Router. 2. Open the DG834G management interface and click VPN Policies to display the VPN Policies screen (Figure 8-40). Select the radio button for the VPN tunnel to be deleted and click the Delete button. Figure 8-40: VPN Policies How to Set Up VPN Tunnels in Special Circumstances When the VPN Wizard and its VPNC defaults (see Table 8-2) are not appropriate for your special circumstances, use one of the following alternatives: • Auto Policy-for a typical automated Internet Key Exchange (IKE) setup, see "Using Auto Policy to Configure VPN Tunnels" on page 8-36. Auto Policy uses the IKE protocol to define the authentication scheme and automatically generate the encryption keys. Virtual Private Networking (Advanced Feature) 202-10006-05, June 2005 8-35