Netgear WBC502 User Manual - Page 109
Wireless, Apply, Scroll down to the Guest Network DHCP Server Settings
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Insight Instant AirBridge WBC502 User Manual which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device on page 15). The Device Status page displays the Device Information section and other sections. 4. Under Network, select Wireless. The Wireless Settings page displays. 5. Scroll down to the Guest Network DHCP Server Settings section. You can change the DHCP server settings for a guest network only of you enabled at least one guest network on a 5 GHz SSID. Otherwise, the fields are masked out. 6. Configure the settings that are described in the following table, keeping in mind that the IP address, starting IP address, and ending IP address must be in the same range. Setting IP Address Subnet Mask Starting IP Address Ending IP Address WINS Server IP Description The IP address for the guest network. The default IP address is 192.168.200.1. The subnet mask associated with the IP address. The default subnet mask is 255.255.255.0. The starting IP address in the address range from which a WiFi client on a guest network can be assigned an IP address. The default starting IP address is 192.168.200.100. The ending IP address in the address range from which a WiFi client on a guest network can be assigned an IP address. The default ending IP address is 192.168.200.200. The IP address of an optional Windows Internet Name Service. 7. Click the Save button. Your settings are saved but not yet applied. A pop-up window opens. The window shows the number of changes to be applied. 8. In the pop-up window, click the Apply button. Your changes are applied. If the WiFi link must be reestablished, the page displays the number of seconds before the AirBridge is back online. Manage Advanced WiFi and 109 Radio Features User Manual