Netgear WBC502 User Manual - Page 81
Set up WPA2-Enterprise security on a master or access point, Enabled, Guest Network, Apply
![]() |
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Insight Instant AirBridge WBC502 User Manual • To enable and configure a new 5 GHz SSID as a guest network, do the following: a. Select the Enabled check box for the 5 GHz SSID. b. Select the Guest Network check box for the 5 GHz SSID. c. Click the Edit button for the 5 GHz SSID. A new page opens. d. Configure the settings for the 5 GHz SSID. For more information, see Change or configure a 5 GHz SSID for an access point on page 76. e. Click the Save button. Your settings are saved but not yet applied. The page closes. The Wireless Settings page displays again. A pop-up window opens. The window shows the number of changes to be applied. 6. Click the Apply button. Your settings are saved and applied. The WiFi connection is reestablished. The page displays the number of seconds before the AirBridge is back online. Set up WPA2-Enterprise security on a master or access point Use this task if the operation mode of the AirBridge is AirBridge Master or Access Point. When you set up WPA2-Enterprise security on a master or access point, you must specify the RADIUS authentication server settings. As an option, you can also specify a RADIUS accounting server, or you can set up a RADIUS accounting server separate from WPA2-Enterprise security (see Set up a RADIUS accounting server on a master or access point on page 104). The link partner or partners of the master or access point must use the same RADIUS authentication server settings. To set up WPA2-Enterprise security on a master or access point: 1. Open a web browser from a computer that is connected to the same network as the AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the AirBridge. The login page displays. If your browser does not display the login page but displays a security message and does not let you proceed, see Log in to the AirBridge after initial setup on page 34. 3. Enter the AirBridge user name and local device password. Manage the WiFi and Radio 81 Features User Manual
![](/manual_guide/products/netgear-wbc502-user-manual-ed64d0f/81.png)