Home » Netgear Manuals » Wireless » Netgear WBC502 » Manual Viewer

Netgear WBC502 User Manual - Page 9

About NETGEAR Insight

Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Insight Instant AirBridge WBC502 User Manual You can mount the AirBridge outside to a wall or pole and provide power to the AirBridge through an Ethernet cable that is connected to the provided power adapter, which must be installed indoors. The AirBridge integrates a high-gain directional antenna for a line of sight connection to other AirBridges or WiFi clients. The AirBridge provides two 10/100/1000BASE-T RJ-45 LAN ports for network connections. One LAN port must be connected to the provided power adapter. Use Category 5e (Cat 5e) or higher-rated Ethernet cables terminated with RJ-45 connectors to make Gigabit connections. For more information about the hardware, see the hardware installation guide. The AirBridge provides administrative management options that let you configure, monitor, and control the AirBridge and the WiFi network: • Using the local browser user interface (UI) you can configure the AirBridge and set up a WiFi connection between two or more units in any of the supported operation modes. This manual (the user manual) describes the options that are available to you when you use the local browser UI. • Using NETGEAR Insight, you can set up a pair or a group of AirBridges, with one AirBridge functioning as the master and one or more other AirBridges functioning as satellites. For more information about NETGEAR Insight, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support. About NETGEAR Insight To configure and manage the AirBridge as a master or satellite in a point-to-point or point-to-multipoint setup, you can use NETGEAR Insight app on your iOS or Android mobile device and connect to the Insight cloud-based management platform. For Insight Premium and Insight Pro subscribers, the AirBridge also supports the Insight Cloud portal, which is the website that provides access to the Insight cloud-based management platform. Note: At this time, NETGEAR Insight does not support the access point and client bridge operation modes. To configure and manage the AirBridge as an access point or client bridge, you first must change the management mode to Standalone Mode, and then use the local browser UI. For more information, see Change the management mode to NETGEAR Insight Mode or Standalone Mode on page 111. This user manual describes the local browser UI. For more information about NETGEAR Insight, visit insight.netgear.com and see the NETGEAR knowledge base at netgear.com/support/product/insight.aspx. Access the AirBridge and Use 9 the Easy Setup Method User Manual

Section	Page
Contents	3
1. Access the AirBridge and Use the Easy Setup Method	7
Related documentation	8
Overview	8
About NETGEAR Insight	9
AirBridge label	10
Operation mode: AirBridge Master, AirBridge Satellite, Access Point, or Client Bridge	10
AirBridge mode	12
Access the AirBridge for initial configuration	14
Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device	15
Connect over the Internet using the NETGEAR Insight Cloud portal	17
Connect over WiFi using a WiFi-enabled computer or mobile device	18
Connect over Ethernet using a computer connected to the same network	23
Connect over Ethernet using a directly connected computer	28
Operation mode and default settings after the Day Zero Easy Setup configuration	33
Log in to the AirBridge after initial setup	34
Change the language of the local browser UI	35
2. Manually Configure or Change the Operation Mode	37
Recommendations for configuration	38
Configure the AirBridge as a master in a point-to-point or point-to-multipoint setup	38
Configure the AirBridge as a satellite in a point-to-point setup	40
Configure the AirBridge as an access point	42
Configure the AirBridge as a client bridge	45
3. Manage the Wired Network Settings	49
Specify a static IPv4 address for the AirBridge	50
Specify a link-local IPv6 address for the AirBridge	51
Reenable the DHCP client of the AirBridge	52
Manage the STP settings	53
4. Manage the WiFi and Radio Features	56
Recommended configuration order	57
Change the device name of the AirBridge	57
Change the country and region of operation	58
Change the AirBridge mode	59
Scan for neighboring access points	62
Specify the approximate distance for the WiFi connection	64
Manage the 5 GHz SSIDs and WiFi security	65
Change the 5 GHz SSID or WiFi security mode for a satellite	67
Change or configure a new 5 GHz SSID for a master with the AirBridge mode enabled	68
Change or configure a new 5 GHz SSID for a master with the AirBridge mode disabled	71
Change the 5 GHz SSID or WiFi security mode for a client bridge	75
Change or configure a 5 GHz SSID for an access point	76
Configure a guest network on an access point	80
Set up WPA2-Enterprise security on a master or access point	81
Set up WPA2-Enterprise security on a satellite or client bridge	84
Manage the settings for the 2.4 GHz management SSID	86
Change the passphrase for the 2.4 GHz management SSID	86
Disable the idle time-out for the 2.4 GHz management SSID	87
Disable the 2.4 GHz management SSID	88
5. Manage Advanced WiFi and Radio Features	90
Recommended configuration order	91
Manage the channel high throughput mode	91
Manage the channel or channels	92
Manage the radio transmit power	94
Change the bit rate	95
Manage client limits	96
Manage time slot assignments to satellites	98
Manage the satellite priority	99
Set up a WiFi on/off schedule for a 5 GHz SSID	100
Set up a MAC filter for a 5 GHz SSID	102
Set up a RADIUS accounting server on a master or access point	104
Manually block a WiFi client or connection from a 5 GHz SSID	105
Configure traffic shaping for a 5 GHz SSID	106
Change the DHCP server settings for a guest WiFi network	108
6. Maintain the AirBridge	110
Change the management mode to NETGEAR Insight Mode or Standalone Mode	111
Change the management mode to NETGEAR Insight Mode	112
Change the management mode to Standalone Mode	113
Upgrade the firmware on the AirBridge	113
Reboot the AirBridge from the local browser UI	115
Schedule the AirBridge to reboot	116
Manage the configuration file of the AirBridge	117
Back up the AirBridge configuration settings	117
Restore the AirBridge configuration settings	118
Reset the AirBridge to factory default settings	119
Manage the date and time settings	120
Configure and view the logs	122
View and manage the system log	122
Set up a remote log server	124
Set up email alerts	125
Manage access security settings	127
Change the local login password	127
Manage the HTTPS settings	128
Manage the SSH settings	129
Specify a management VLAN	130
7. Monitor the AirBridge and its Network Connections	132
View the device status and other information	133
View the 5 GHz WiFi connections	137
View the CPU load on the AirBridge	139
View the 5 GHz WiFi and LAN traffic load	140
8. Perform Diagnostics and Troubleshooting	141
Send a ping	142
Send a traceroute request	143
Send a name server lookup request	144
Perform a speed test	145
Quick tips for troubleshooting	146
Troubleshoot with the LEDs	149
Power LED remains off	150
WLAN LED is off	150
A LAN LED is off while a device is connected	151
Troubleshoot the WiFi connectivity	152
Troubleshoot the WiFi connectivity between a satellite and a master	152
Troubleshoot the WiFi connectivity between a client bridge and an access point	153
Troubleshoot the WiFi connectivity between a WiFi client and a master or access point	154
You cannot log in to the AirBridge over a LAN connection	155
Changes are not saved	156
Troubleshoot your network using your computer ping utility	156
Test the LAN path from your computer to the AirBridge	156
Test the path from your computer to a remote device	157
A. Factory Default Settings and Technical Specifications	158
Factory default settings	159

Match case Limit results 1 per page

You can mount the AirBridge outside to a wall or pole and provide power to the

AirBridge through an Ethernet cable that is connected to the provided power adapter,

which must be installed indoors. The AirBridge integrates a high-gain directional antenna

for a line of sight connection to other AirBridges or WiFi clients.

The AirBridge provides two 10/100/1000BASE-T RJ-45 LAN ports for network

connections. One LAN port must be connected to the provided power adapter. Use

Category 5e (Cat 5e) or higher-rated Ethernet cables terminated with RJ-45 connectors

to make Gigabit connections.

For more information about the hardware, see the hardware installation guide.

The AirBridge provides administrative management options that let you configure,

monitor, and control the AirBridge and the WiFi network:

•

Using the local browser user interface (UI) you can configure the AirBridge and set

up a WiFi connection between two or more units in any of the supported operation

modes. This manual (the user manual) describes the options that are available to

you when you use the local browser UI.

•

Using NETGEAR Insight, you can set up a pair or a group of AirBridges, with one

AirBridge functioning as the master and one or more other AirBridges functioning

as satellites.

For more information about NETGEAR Insight, visit netgear.com/insight

and see the

NETGEAR knowledge base articles at netgear.com/support

About NETGEAR Insight

To configure and manage the AirBridge as a master or satellite in a point-to-point or

point-to-multipoint setup, you can use NETGEAR Insight app on your iOS or Android

mobile device and connect to the Insight cloud-based management platform. For Insight

Premium and Insight Pro subscribers, the AirBridge also supports the Insight Cloud

portal, which is the website that provides access to the Insight cloud-based management

platform.

Note:

At this time, NETGEAR Insight does not support the access point and client

bridge operation modes. To configure and manage the AirBridge as an access point

or client bridge, you first must change the management mode to Standalone Mode,

and then use the local browser UI. For more information, see Change

the

management

mode

NETGEAR

Insight

Mode

Standalone

Mode

on page 111.

This user manual describes the local browser UI. For more information about NETGEAR

Insight, visit insight.netgear.com

and see the NETGEAR knowledge base at

netgear.com/support/product/insight.aspx

User Manual

Access the AirBridge and Use

the Easy Setup Method

Insight Instant AirBridge WBC502 User Manual