Home » Netgear Manuals » Wireless » Netgear WBC502 » Manual Viewer

Netgear WBC502 User Manual - Page 111

Change the management mode to NETGEAR Insight Mode or Standalone Mode

Add to My Manuals
Save this manual to your list of manuals

Page 111 highlights

Insight Instant AirBridge WBC502 User Manual Change the management mode to NETGEAR Insight Mode or Standalone Mode The AirBridge can function in one of the following management modes: • NETGEAR Insight Mode. You can manage the AirBridge remotely from a mobile device on which the NETGEAR Insight app is installed or, if you are an Insight Premium or Insight Pro subscriber, through the Insight Cloud portal. The NETGEAR Insight Mode is the default management mode. In this mode, you can connect to the AirBridge over the local browser UI (which you normally use in the Standalone Mode), but most fields, menus, and buttons are masked out. For information about the Insight app and Insight Cloud portal, visit insight.netgear.com and see the NETGEAR knowledge base at netgear.com/support/product/insight.aspx. Note: At this time, NETGEAR Insight does not support the access point and client bridge operation modes. To configure and manage the AirBridge as an access point or client bridge, you first must change the management mode to Standalone Mode, and then use the local browser UI. IMPORTANT: When you change the management mode from Standalone Mode to NETGEAR Insight Mode, the Insight cloud-based management platform pushes the latest Insight configuration to the AirBridge. • Standalone Mode. You can manage the AirBridge locally from a WiFi or wired device through the local browser UI. (In this context, Standalone Mode and local browser UI are the same management mode.) In this mode, the AirBridge functions as a standalone device and is not connected to the Insight cloud-based management platform. If the AirBridge functions in the access point or client bridge operation mode, you must use the local browser UI. Note: If you are already using the NETGEAR Insight Mode to manage the AirBridge but want to change the management mode to Standalone Mode, you do not need to manually remove the AirBridge from your Insight account, you do not need to reset the AirBridge to factory default setting, and you do not need to entirely reconfigure the AirBridge. Rather, you can use the local browser UI to change the management mode. Even if the management mode is NETGEAR Insight Mode, you can log in to the local browser UI using your Insight network password for the Insight network location to which the AirBridge is assigned. Maintain the AirBridge 111 User Manual

Section	Page
Contents	3
1. Access the AirBridge and Use the Easy Setup Method	7
Related documentation	8
Overview	8
About NETGEAR Insight	9
AirBridge label	10
Operation mode: AirBridge Master, AirBridge Satellite, Access Point, or Client Bridge	10
AirBridge mode	12
Access the AirBridge for initial configuration	14
Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device	15
Connect over the Internet using the NETGEAR Insight Cloud portal	17
Connect over WiFi using a WiFi-enabled computer or mobile device	18
Connect over Ethernet using a computer connected to the same network	23
Connect over Ethernet using a directly connected computer	28
Operation mode and default settings after the Day Zero Easy Setup configuration	33
Log in to the AirBridge after initial setup	34
Change the language of the local browser UI	35
2. Manually Configure or Change the Operation Mode	37
Recommendations for configuration	38
Configure the AirBridge as a master in a point-to-point or point-to-multipoint setup	38
Configure the AirBridge as a satellite in a point-to-point setup	40
Configure the AirBridge as an access point	42
Configure the AirBridge as a client bridge	45
3. Manage the Wired Network Settings	49
Specify a static IPv4 address for the AirBridge	50
Specify a link-local IPv6 address for the AirBridge	51
Reenable the DHCP client of the AirBridge	52
Manage the STP settings	53
4. Manage the WiFi and Radio Features	56
Recommended configuration order	57
Change the device name of the AirBridge	57
Change the country and region of operation	58
Change the AirBridge mode	59
Scan for neighboring access points	62
Specify the approximate distance for the WiFi connection	64
Manage the 5 GHz SSIDs and WiFi security	65
Change the 5 GHz SSID or WiFi security mode for a satellite	67
Change or configure a new 5 GHz SSID for a master with the AirBridge mode enabled	68
Change or configure a new 5 GHz SSID for a master with the AirBridge mode disabled	71
Change the 5 GHz SSID or WiFi security mode for a client bridge	75
Change or configure a 5 GHz SSID for an access point	76
Configure a guest network on an access point	80
Set up WPA2-Enterprise security on a master or access point	81
Set up WPA2-Enterprise security on a satellite or client bridge	84
Manage the settings for the 2.4 GHz management SSID	86
Change the passphrase for the 2.4 GHz management SSID	86
Disable the idle time-out for the 2.4 GHz management SSID	87
Disable the 2.4 GHz management SSID	88
5. Manage Advanced WiFi and Radio Features	90
Recommended configuration order	91
Manage the channel high throughput mode	91
Manage the channel or channels	92
Manage the radio transmit power	94
Change the bit rate	95
Manage client limits	96
Manage time slot assignments to satellites	98
Manage the satellite priority	99
Set up a WiFi on/off schedule for a 5 GHz SSID	100
Set up a MAC filter for a 5 GHz SSID	102
Set up a RADIUS accounting server on a master or access point	104
Manually block a WiFi client or connection from a 5 GHz SSID	105
Configure traffic shaping for a 5 GHz SSID	106
Change the DHCP server settings for a guest WiFi network	108
6. Maintain the AirBridge	110
Change the management mode to NETGEAR Insight Mode or Standalone Mode	111
Change the management mode to NETGEAR Insight Mode	112
Change the management mode to Standalone Mode	113
Upgrade the firmware on the AirBridge	113
Reboot the AirBridge from the local browser UI	115
Schedule the AirBridge to reboot	116
Manage the configuration file of the AirBridge	117
Back up the AirBridge configuration settings	117
Restore the AirBridge configuration settings	118
Reset the AirBridge to factory default settings	119
Manage the date and time settings	120
Configure and view the logs	122
View and manage the system log	122
Set up a remote log server	124
Set up email alerts	125
Manage access security settings	127
Change the local login password	127
Manage the HTTPS settings	128
Manage the SSH settings	129
Specify a management VLAN	130
7. Monitor the AirBridge and its Network Connections	132
View the device status and other information	133
View the 5 GHz WiFi connections	137
View the CPU load on the AirBridge	139
View the 5 GHz WiFi and LAN traffic load	140
8. Perform Diagnostics and Troubleshooting	141
Send a ping	142
Send a traceroute request	143
Send a name server lookup request	144
Perform a speed test	145
Quick tips for troubleshooting	146
Troubleshoot with the LEDs	149
Power LED remains off	150
WLAN LED is off	150
A LAN LED is off while a device is connected	151
Troubleshoot the WiFi connectivity	152
Troubleshoot the WiFi connectivity between a satellite and a master	152
Troubleshoot the WiFi connectivity between a client bridge and an access point	153
Troubleshoot the WiFi connectivity between a WiFi client and a master or access point	154
You cannot log in to the AirBridge over a LAN connection	155
Changes are not saved	156
Troubleshoot your network using your computer ping utility	156
Test the LAN path from your computer to the AirBridge	156
Test the path from your computer to a remote device	157
A. Factory Default Settings and Technical Specifications	158
Factory default settings	159

Match case Limit results 1 per page

Change the management mode to

NETGEAR Insight Mode or Standalone Mode

The AirBridge can function in one of the following management modes:

•

NETGEAR Insight Mode

. You can manage the AirBridge remotely from a mobile

device on which the NETGEAR Insight app is installed or, if you are an Insight Premium

or Insight Pro subscriber, through the Insight Cloud portal. The NETGEAR Insight

Mode is the default management mode. In this mode, you

can

connect to the

AirBridge over the local browser UI (which you normally use in the Standalone Mode),

but most fields, menus, and buttons are masked out. For information about the

Insight app and Insight Cloud portal, visit insight.netgear.com

and see the NETGEAR

knowledge base at netgear.com/support/product/insight.aspx

Note:

At this time, NETGEAR Insight does not support the access point and client

bridge operation modes. To configure and manage the AirBridge as an access point

or client bridge, you first must change the management mode to Standalone Mode,

and then use the local browser UI.

IMPORTANT:

When you change the management mode from Standalone Mode

to NETGEAR Insight Mode, the Insight cloud-based management platform pushes

the latest Insight configuration to the AirBridge.

•

Standalone Mode

. You can manage the AirBridge locally from a WiFi or wired

device through the local browser UI. (In this context, Standalone Mode and local

browser UI are the same management mode.) In this mode, the AirBridge functions

as a standalone device and is not connected to the Insight cloud-based management

platform. If the AirBridge functions in the access point or client bridge operation

mode, you must use the local browser UI.

Note:

If you are already using the NETGEAR Insight Mode to manage the AirBridge

but want to change the management mode to Standalone Mode, you do

not

need

to manually remove the AirBridge from your Insight account, you do

not

need to

reset the AirBridge to factory default setting, and you do

not

need to entirely

reconfigure the AirBridge. Rather, you can use the local browser UI to change the

management mode. Even if the management mode is NETGEAR Insight Mode, you

can

network location to which the AirBridge is assigned.

User Manual

111

Maintain the AirBridge

Insight Instant AirBridge WBC502 User Manual