Netgear WBC502 User Manual - Page 129
Manage the SSH settings, Enable, Disable, Apply, admin, Advanced
![]() |
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Insight Instant AirBridge WBC502 User Manual 6. If HTTPS is enabled, in the HTTPS Setting section, select one of the following HTTPS Forward radio buttons: • Enable. An attempt to log in over an HTTP connection is automatically changed to an HTTPS connection, that is, HTTP access is automatically forwarded to HTTPS access. This is the default setting. We recommend that you keep HTTPS forwarding enabled. • Disable. An attempt to log in over an HTTP connection is not automatically changed to an HTTPS connection. 7. Click the Apply button. Your settings are saved and applied. Manage the SSH settings By default secure shell (SSH) access is disabled on the AirBridge. You can enable it. To manage the SSH settings: 1. Open a web browser from a computer that is connected to the same network as the AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the AirBridge. The login page displays. If your browser does not display the login page but displays a security message and does not let you proceed, see Log in to the AirBridge after initial setup on page 34. 3. Enter the AirBridge user name and local device password. The user name is admin. The local device password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. If you previously managed the AirBridge through the NETGEAR Insight app or Insight Cloud portal, enter the Insight network password for the Insight network location to which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device on page 15). The Device Status page displays the Device Information section and other sections. 4. Under Management, select Advanced. The page displays the advanced settings with the Management Mode section at the top. 5. In the SSH Setting section, select one of the following Status radio buttons: • Enable. SSH access is enabled. Maintain the AirBridge 129 User Manual
![](/manual_guide/products/netgear-wbc502-user-manual-ed64d0f/129.png)