Netgear WBC502 User Manual - Page 112
Change the management mode to NETGEAR Insight Mode, IMPORTANT
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Insight Instant AirBridge WBC502 User Manual IMPORTANT: If you first add the AirBridge to a NETGEAR Insight network location and manage the AirBridge through the Insight app or Insight Cloud portal and then you change the management mode to Standalone Mode, you might need to continue to use the Insight network password for the Insight network location to access the local browser UI until you manually change the local device password on the AirBridge. Change the management mode to NETGEAR Insight Mode To change the management mode from Standalone Mode to NETGEAR Insight Mode: 1. Open a web browser from a computer that is connected to the same network as the AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the AirBridge. The login page displays. If your browser does not display the login page but displays a security message and does not let you proceed, see Log in to the AirBridge after initial setup on page 34. 3. Enter the AirBridge user name and local device password. The user name is admin. The local device password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. If you previously managed the AirBridge through the NETGEAR Insight app or Insight Cloud portal, enter the Insight network password for the Insight network location to which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device on page 15). The Device Status page displays the Device Information section and other sections. 4. Under Management, select Advanced. The page displays the advanced settings with the Management Mode section at the top. 5. In the Management Mode section, select the NETGEAR Insight Mode radio button. IMPORTANT: When you change the management mode from Standalone Mode to NETGEAR Insight Mode, the Insight cloud-based management platform pushes the latest Insight configuration to the AirBridge. 6. Click the Apply button. Your settings are saved and applied. Maintain the AirBridge 112 User Manual