Netgear WBC502 User Manual - Page 59
Change the AirBridge mode
![]() |
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Insight Instant AirBridge WBC502 User Manual To change the country and region of operation of the AirBridge: 1. Open a web browser from a computer that is connected to the same network as the AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the AirBridge. The login page displays. If your browser does not display the login page but displays a security message and does not let you proceed, see Log in to the AirBridge after initial setup on page 34. 3. Enter the AirBridge user name and local device password. The user name is admin. The local device password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. If you previously managed the AirBridge through the NETGEAR Insight app or Insight Cloud portal, enter the Insight network password for the Insight network location to which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device on page 15). The Device Status page displays the Device Information section and other sections. 4. Under Network, select Wireless. The Wireless Settings page displays. 5. From the Country / Region menu, select the country and region in which the AirBridge is operating. 6. Click the Save button. Your settings are saved but not yet applied. A pop-up window opens. The window shows the number of changes to be applied. 7. In the pop-up window, click the Apply button. Your changes are applied. If the WiFi link must be reestablished, the page displays the number of seconds before the AirBridge is back online. Change the AirBridge mode You can select the AirBridge mode only if the operation mode of the AirBridge is AirBridge Master or AirBridge Satellite. In a master-to-satellite setup, you must either enable the AirBridge mode on both the master and the satellite or disable it on both the master and the satellite. That is, do not enable it on the master and disable it on the satellite, or the other way around. Manage the WiFi and Radio 59 Features User Manual
![](/manual_guide/products/netgear-wbc502-user-manual-ed64d0f/59.png)