Netgear WBC502 User Manual - Page 136
mode is AirBridge Master or Access Point., Refresh
![]() |
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Insight Instant AirBridge WBC502 User Manual Table 9. Wireless LAN Information - 5GHz section (Continued) Setting Description Channel The WiFi channel. For for information, see Manage the channel or channels on page 92. Distance The distance is specified for the link partner or partners of the AirBridge. For for information, see Specify the approximate distance for the WiFi connection on page 64. The information that is described in the following table displays only if the operation mode is AirBridge Master or Access Point. For more information about these settings, see Change or configure a new 5 GHz SSID for a master with the AirBridge mode enabled on page 68, Change or configure a new 5 GHz SSID for a master with the AirBridge mode disabled on page 71, or Change or configure a 5 GHz SSID for an access point on page 76. Table 10. Statistics Setting Profile SSID Security VID 802.1Q RX (Packets) TX (Packets) Description The profile number, which depends on the number of SSIDs that are supported and enabled on the AirBridge. The WiFi network name. The type of WiFi security on the SSID. The VLAN ID, if any, that is configured for the SSID. Shows whether VLAN isolation is enabled. The amount of packets in Bytes and the number of packets that is received on the SSID. The amount of packets in Bytes and the number of packets that is transmitted on the SSID. 4. To refresh the information on the page, click the Refresh button. Monitor the AirBridge and its 136 Network Connections User Manual
![](/manual_guide/products/netgear-wbc502-user-manual-ed64d0f/136.png)