Netgear WBC502 User Manual - Page 42
Con the AirBridge as an access point
![]() |
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Insight Instant AirBridge WBC502 User Manual d. If the type of security is WPA2-PSK, in the Passphrase field, enter the WiFi passphrase (also referred to as WiFi password or network key). If the type of security is WPA2-Enterprise, see Set up WPA2-Enterprise security on a satellite or client bridge on page 84. e. Click the Save button. Your settings are saved but not yet applied. The page closes. The Wireless Settings page displays again. A pop-up window opens. The window shows the number of changes to be applied. 10. Click the Apply button. Your settings are saved and applied. The WiFi connection is reestablished. The page displays the number of seconds before the AirBridge is back online. Configure the AirBridge as an access point You can configure the AirBridge as an access point that can support multiple 5 GHZ SSIDs. You install the access point at a main site to provide network and Internet connectivity to individual WiFi clients, client bridges, other access point that extend the WiFi network, or a combination of these. This setup does not require a line of sight between the access point and the WiFi clients, client bridge, or other access point. The powerful antenna of the AirBridge allows for an extended WiFi range. To configure the AirBridge as an access point: 1. Open a web browser from a computer that is connected to the same network as the AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the AirBridge. The login page displays. If your browser does not display the login page but displays a security message and does not let you proceed, see Log in to the AirBridge after initial setup on page 34. 3. Enter the AirBridge user name and local device password. The user name is admin. The local device password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. If you previously managed the AirBridge through the NETGEAR Insight app or Insight Cloud portal, enter the Insight network password for the Insight network location to which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device on page 15). The Device Status page displays the Device Information section and other sections. 4. Under Network, select Wireless. Manually Configure or Change 42 the Operation Mode User Manual
![](/manual_guide/products/netgear-wbc502-user-manual-ed64d0f/42.png)