Netgear WBC502 User Manual - Page 84
Set up WPA2-Enterprise security on a satellite or client bridge, admin, Wireless, Security Mode
![]() |
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Insight Instant AirBridge WBC502 User Manual Set up WPA2-Enterprise security on a satellite or client bridge Use this task if the operation mode of the AirBridge is AirBridge Satellite or Client Bridge. When you set up WPA2-Enterprise security on a satellite or client bridge, you must specify the same RADIUS server authentication settings that you specify on the master or access point. Note: For a client bridge, you can also set up WPA-Enterprise if the link partner is not an AirBridge functioning as an access point but another type of access point that supports WPA-Enterprise. To set up WPA2-Enterprise security on a satellite or client bridge: 1. Open a web browser from a computer that is connected to the same network as the AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the AirBridge. The login page displays. If your browser does not display the login page but displays a security message and does not let you proceed, see Log in to the AirBridge after initial setup on page 34. 3. Enter the AirBridge user name and local device password. The user name is admin. The local device password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. If you previously managed the AirBridge through the NETGEAR Insight app or Insight Cloud portal, enter the Insight network password for the Insight network location to which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device on page 15). The Device Status page displays the Device Information section and other sections. 4. Under Network, select Wireless. The Wireless Settings page displays. 5. In the Wireless Settings - 5GHz section, click the Edit button for the 5 GHz SSID. A new page opens. 6. From the Security Mode menu, select WPA2-Enterprise. Additional fields display. Note: For a client bridge, you can also select WPA-Enterprise. Use that option only if the link partner is not an AirBridge functioning as an access point but another type of access point that supports WPA-Enterprise. Manage the WiFi and Radio 84 Features User Manual
![](/manual_guide/products/netgear-wbc502-user-manual-ed64d0f/84.png)