Netgear WBC502 User Manual - Page 37
Manually Con or Change the Operation Mode
![]() |
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2 Manually Configure or Change the Operation Mode When you access the AirBridge for the first time, you must select an operation mode on the Day Zero Easy Setup page. After you do so, you can also manually change the operation mode and settings. This chapter describes how you can manually configure the operation mode of the AirBridge and the settings that are associated with the selected operation mode. For an overview of the operation modes, see Operation mode: AirBridge Master, AirBridge Satellite, Access Point, or Client Bridge on page 10. The chapter includes the following sections: • Recommendations for configuration • Configure the AirBridge as a master in a point-to-point or point-to-multipoint setup • Configure the AirBridge as a satellite in a point-to-point setup • Configure the AirBridge as an access point • Configure the AirBridge as a client bridge CAUTION: This device must be professionally installed. It is the installer's responsibility to follow local country regulations, including operations within legal frequency channels, output power, and DFS requirements. The vendor, reseller, or distributor is not responsible for illegal wireless operations. For more details, see the device's terms and conditions. 37
![](/manual_guide/products/netgear-wbc502-user-manual-ed64d0f/37.png)