Netgear WBC502 User Manual - Page 85

Insight Instant AirBridge WBC502 User Manual 7. Configure the WPA2-Enterprise settings as described in he following table. The settings that you must enter depend on the configuration of the master or access point and the RADIUS server. Setting EAP Method Description From the EAP Method menu, select one of the following Extensible Authentication Protocol (EAP) methods: • TTLS. Tunneled Transport Layer Security. • PEAP. Protected Extensible Authentication Protocol. EAP Authentication From the EAP Authentication menu, select one of the following EAP authentication methods: • MSCHAP. Microsoft Challenge-Handshake Authentication Protocol version 1 (MS-CHAPv1). • MSCAPV2. Microsoft Challenge-Handshake Authentication Protocol version 2 (MS-CHAPv2). Authentication Identity Enter the user name that is required for the AirBridge to access the authentication RADIUS server during the authentication process. Authentication Password Enter the password (shared key) that is required for the AirBridge to access the authentication RADIUS server during the authentication process. This password must be the same as the one that is configured on the master or satellite. 8. Click the Save button. Your settings are saved but not yet applied. The page closes. The Wireless Settings page displays again. A pop-up window opens. The window shows the number of changes to be applied. 9. In the pop-up window, click the Apply button. Your changes are applied. If the WiFi link must be reestablished, the page displays the number of seconds before the AirBridge is back online. Manage the WiFi and Radio 85 Features User Manual