Netgear WBC502 User Manual - Page 58
Change the country and region of operation
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Insight Instant AirBridge WBC502 User Manual The user name is admin. The local device password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. If you previously managed the AirBridge through the NETGEAR Insight app or Insight Cloud portal, enter the Insight network password for the Insight network location to which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device on page 15). The Device Status page displays the Device Information section and other sections. 4. Under Network, select Wireless. The Wireless Settings page displays. 5. In the AP Name field, enter a new name. The name must contain alphanumeric characters, cannot be longer than 15 characters, and cannot contains spaces. The name can contain hyphens, but cannot start or end with a hyphen. 6. Click the Save button. Your settings are saved but not yet applied. A pop-up window opens. The window shows the number of changes to be applied. 7. In the pop-up window, click the Apply button. Your changes are applied. If the WiFi link must be reestablished, the page displays the number of seconds before the AirBridge is back online. Change the country and region of operation After initial configuration, you can change the country and region of operation of the AirBridge. WARNING: Make sure that the country is set to the location where the device is operating. You are responsible for complying with the local, regional, and national regulations that are set for channels, power levels, and frequency ranges. WARNING: It might not be legal to operate the AirBridge in a region other than the regions listed in the menu. If your country or region is not listed, check with your local government agency. Manage the WiFi and Radio 58 Features User Manual