Home » Netgear Manuals » Wireless » Netgear WBC502 » Manual Viewer

Netgear WBC502 User Manual - Page 12

AirBridge mode

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Insight Instant AirBridge WBC502 User Manual also shows the features that are determined by whether the AirBridge mode is enabled or disabled. Table 1. Features determined by the operation mode and the AirBridge mode Feature AirBridge Master AirBridge Satellite Access Point Client Bridge AirBridge mode enabled AirBridge mode disabled AirBridge mode enabled1 AirBridge mode disabled1 AirBridge mode N/A AirBridge mode N/A WiFi range Long distance2 Extended range3 Long distance2 Extended range3 Extended range3 Extended range3 Line of sight Required N/A Required N/A N/A N/A WiFi link partners AirBridge satellite only AirBridge, any AirBridge WiFi AP, and master only WiFi clients AirBridge master only WiFi clients, AirBridge AP, and any WiFi AP AirBridge AP or any WiFi AP Number of 1 4 1 1 8 1 5 GHz SSIDs Management option Standalone Mode4 or NETGEAR Insight Standalone Mode4 or NETGEAR Insight Standalone Mode4 or NETGEAR Insight Standalone Mode4 or NETGEAR Insight Standalone Mode4 only 1. The AirBridge mode setting on the satellite must be the same as the one on the master. Standalone Mode4 only 2. Reliable long-distance WiFi connection of 1.8 miles (3 km) or more for a limited number of satellites. 3. Powerful antenna for a reliable extended-range WiFi connection for multiple individual WiFi clients. 4. Standalone Mode lets you use all options of the local browser UI. AirBridge mode The AirBridge mode specifies the type of multiple access method that the AirBridge uses. Note: Closely related to the AirBridge mode is the AirBridge operation mode (that is, with the term operation). For more information, see Operation mode: AirBridge Master, AirBridge Satellite, Access Point, or Client Bridge on page 10. You can select the AirBridge mode only if the operation mode of the AirBridge is AirBridge Master or AirBridge Satellite. In a master-to-satellite setup, you must either enable or disable the AirBridge mode on both the master and the satellite. (Do not enable it on one and disable it on the other.) Access the AirBridge and Use 12 the Easy Setup Method User Manual

Section	Page
Contents	3
1. Access the AirBridge and Use the Easy Setup Method	7
Related documentation	8
Overview	8
About NETGEAR Insight	9
AirBridge label	10
Operation mode: AirBridge Master, AirBridge Satellite, Access Point, or Client Bridge	10
AirBridge mode	12
Access the AirBridge for initial configuration	14
Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device	15
Connect over the Internet using the NETGEAR Insight Cloud portal	17
Connect over WiFi using a WiFi-enabled computer or mobile device	18
Connect over Ethernet using a computer connected to the same network	23
Connect over Ethernet using a directly connected computer	28
Operation mode and default settings after the Day Zero Easy Setup configuration	33
Log in to the AirBridge after initial setup	34
Change the language of the local browser UI	35
2. Manually Configure or Change the Operation Mode	37
Recommendations for configuration	38
Configure the AirBridge as a master in a point-to-point or point-to-multipoint setup	38
Configure the AirBridge as a satellite in a point-to-point setup	40
Configure the AirBridge as an access point	42
Configure the AirBridge as a client bridge	45
3. Manage the Wired Network Settings	49
Specify a static IPv4 address for the AirBridge	50
Specify a link-local IPv6 address for the AirBridge	51
Reenable the DHCP client of the AirBridge	52
Manage the STP settings	53
4. Manage the WiFi and Radio Features	56
Recommended configuration order	57
Change the device name of the AirBridge	57
Change the country and region of operation	58
Change the AirBridge mode	59
Scan for neighboring access points	62
Specify the approximate distance for the WiFi connection	64
Manage the 5 GHz SSIDs and WiFi security	65
Change the 5 GHz SSID or WiFi security mode for a satellite	67
Change or configure a new 5 GHz SSID for a master with the AirBridge mode enabled	68
Change or configure a new 5 GHz SSID for a master with the AirBridge mode disabled	71
Change the 5 GHz SSID or WiFi security mode for a client bridge	75
Change or configure a 5 GHz SSID for an access point	76
Configure a guest network on an access point	80
Set up WPA2-Enterprise security on a master or access point	81
Set up WPA2-Enterprise security on a satellite or client bridge	84
Manage the settings for the 2.4 GHz management SSID	86
Change the passphrase for the 2.4 GHz management SSID	86
Disable the idle time-out for the 2.4 GHz management SSID	87
Disable the 2.4 GHz management SSID	88
5. Manage Advanced WiFi and Radio Features	90
Recommended configuration order	91
Manage the channel high throughput mode	91
Manage the channel or channels	92
Manage the radio transmit power	94
Change the bit rate	95
Manage client limits	96
Manage time slot assignments to satellites	98
Manage the satellite priority	99
Set up a WiFi on/off schedule for a 5 GHz SSID	100
Set up a MAC filter for a 5 GHz SSID	102
Set up a RADIUS accounting server on a master or access point	104
Manually block a WiFi client or connection from a 5 GHz SSID	105
Configure traffic shaping for a 5 GHz SSID	106
Change the DHCP server settings for a guest WiFi network	108
6. Maintain the AirBridge	110
Change the management mode to NETGEAR Insight Mode or Standalone Mode	111
Change the management mode to NETGEAR Insight Mode	112
Change the management mode to Standalone Mode	113
Upgrade the firmware on the AirBridge	113
Reboot the AirBridge from the local browser UI	115
Schedule the AirBridge to reboot	116
Manage the configuration file of the AirBridge	117
Back up the AirBridge configuration settings	117
Restore the AirBridge configuration settings	118
Reset the AirBridge to factory default settings	119
Manage the date and time settings	120
Configure and view the logs	122
View and manage the system log	122
Set up a remote log server	124
Set up email alerts	125
Manage access security settings	127
Change the local login password	127
Manage the HTTPS settings	128
Manage the SSH settings	129
Specify a management VLAN	130
7. Monitor the AirBridge and its Network Connections	132
View the device status and other information	133
View the 5 GHz WiFi connections	137
View the CPU load on the AirBridge	139
View the 5 GHz WiFi and LAN traffic load	140
8. Perform Diagnostics and Troubleshooting	141
Send a ping	142
Send a traceroute request	143
Send a name server lookup request	144
Perform a speed test	145
Quick tips for troubleshooting	146
Troubleshoot with the LEDs	149
Power LED remains off	150
WLAN LED is off	150
A LAN LED is off while a device is connected	151
Troubleshoot the WiFi connectivity	152
Troubleshoot the WiFi connectivity between a satellite and a master	152
Troubleshoot the WiFi connectivity between a client bridge and an access point	153
Troubleshoot the WiFi connectivity between a WiFi client and a master or access point	154
You cannot log in to the AirBridge over a LAN connection	155
Changes are not saved	156
Troubleshoot your network using your computer ping utility	156
Test the LAN path from your computer to the AirBridge	156
Test the path from your computer to a remote device	157
A. Factory Default Settings and Technical Specifications	158
Factory default settings	159

Match case Limit results 1 per page

also shows the features that are determined by whether the AirBridge mode is enabled

or disabled.

Table 1. Features determined by the operation mode and the AirBridge mode

Client Bridge

Access Point

AirBridge Satellite

AirBridge Master

Feature

AirBridge

mode N/A

AirBridge

mode N/A

AirBridge

mode

disabled

AirBridge

mode

enabled

AirBridge

mode

disabled

AirBridge

mode

enabled

Extended

range

Extended

range

Extended

range

Long

distance

Extended

range

Long

distance

WiFi range

N/A

Required

N/A

Required

Line of sight

AirBridge AP

or any WiFi AP

WiFi clients,

AirBridge AP,

and any WiFi

AirBridge

master only

AirBridge

master only

AirBridge, any

WiFi AP, and

WiFi clients

AirBridge

satellite only

WiFi link

partners

Number of

5 GHz SSIDs

Standalone

Mode

only

Standalone

Mode

only

Standalone

Mode

NETGEAR

Insight

Standalone

Mode

NETGEAR

Insight

Standalone

Mode

NETGEAR

Insight

Standalone

Mode

NETGEAR

Insight

Management

option

1. The AirBridge mode setting on the satellite must be the same as the one on the master.

2. Reliable long-distance WiFi connection of 1.8 miles (3 km) or more for a limited number of satellites.

3. Powerful antenna for a reliable extended-range WiFi connection for multiple individual WiFi clients.

4. Standalone Mode lets you use all options of the local browser UI.

AirBridge mode

The

AirBridge mode

specifies the type of multiple access method that the AirBridge

uses.

Note:

Closely related to the AirBridge mode is the AirBridge operation mode (that is,

with

the term

operation

). For more information, see Operation

mode:

AirBridge

Master,

AirBridge

Satellite,

Access

Point,

Client

Bridge

on page 10.

You can select the AirBridge mode only if the operation mode of the AirBridge is

AirBridge Master or AirBridge Satellite. In a master-to-satellite setup, you must either

enable or disable the AirBridge mode on both the master and the satellite. (Do not

enable it on one and disable it on the other.)

User Manual

Access the AirBridge and Use

the Easy Setup Method

Insight Instant AirBridge WBC502 User Manual