Netgear WBC502 User Manual - Page 86
Manage the settings for the 2.4 GHz management SSID
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Insight Instant AirBridge WBC502 User Manual Manage the settings for the 2.4 GHz management SSID You can use the 2.4 GHz management SSID only to access the local browser UI of the AirBridge from a WiFi device for management purposes. The 2.4 GHz SSID cannot be used for backhaul WiFi connections or for regular WiFi clients connections to the AirBridge. For these types of connections, use a 5 GHz SSID. Note: The SSID (the name of the management WiFi network) is NETGEARXXXXXX-SETUP, in which XXXXXX represents the last six digits of the MAC address of the LAN interface of the AirBridge. You cannot change this name. Change the passphrase for the 2.4 GHz management SSID Other than the passphrase (WiFi password or network key), you cannot change the settings for the 2.4 GHz management SSID. When you performed the initial configuration on the Day Zero Easy Setup page, you were required to change the passphrase for the 2.4 GHz management SSID. You can change the passphrase again. To change the passphrase for the 2.4 GHz management SSID: 1. Open a web browser from a computer that is connected to the same network as the AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection. 2. Enter the IP address that is assigned to the AirBridge. The login page displays. If your browser does not display the login page but displays a security message and does not let you proceed, see Log in to the AirBridge after initial setup on page 34. 3. Enter the AirBridge user name and local device password. The user name is admin. The local device password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. If you previously managed the AirBridge through the NETGEAR Insight app or Insight Cloud portal, enter the Insight network password for the Insight network location to which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight app on an iOS or Android mobile device on page 15). The Device Status page displays the Device Information section and other sections. 4. Under Network, select Wireless. The Wireless Settings page displays. Manage the WiFi and Radio 86 Features User Manual