Netgear WNDAP660 Reference Manual - Page 131
Con the Optional DHCPv4 Server
View all Netgear WNDAP660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660 5. Verify the following for all wireless access points: • All APs are on the same LAN, that is, the LAN IP addresses of all APs are in the same network as the LAN devices. • If you use DHCP, all wireless access points can obtain IP addresses automatically (as DHCP clients). For more information, see Configure the Optional DHCPv4 Server on page 27 or Configure the Optional DHCPv6 Server on page 101. • All wireless access points use the same channel, authentication mode, and security settings. 6. Verify connectivity across the LANs: A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other devices or servers connected to any of the two LAN segments. Note: You can extend repetition of the wireless signal by adding up to two more wireless access points that are configured in point-to-multipoint bridge mode without client association. Also, you can extend the range of the wireless network with NETGEAR wireless antenna accessories. Advanced Configuration 131