Netgear WNDAP660 Reference Manual - Page 32
Turn on the radio by selecting the, check box. A pop-up screen displays.
View all Netgear WNDAP660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660 Figure 16. 2. Specify the wireless mode in the 5 GHz band by selecting one of the following radio buttons: • 11a. 802.11n-compliant devices can connect to the access point because they are backward compatible. • 11na. This is the default setting. If you keep the default setting, go to Step 5. When you change the wireless mode, the Turn Radio On check box is automatically cleared, and all fields, buttons, and drop-down lists onscreen are masked out. 3. Turn on the radio by selecting the Turn Radio On check box. A pop-up screen displays. Note: Under normal conditions, you want the radio to be turned on. Turning off the radio disables access through the wireless access point, which can be helpful for configuration, network tuning, or troubleshooting activities. 4. Click OK to confirm the change of wireless mode. The change does not take effect until you click the Apply button after you have completed the wireless configuration. Installation and Basic Configuration 32