Netgear WNDAP660 Reference Manual - Page 24
Apply, To con time settings, Configuration > System > Basic > Time
View all Netgear WNDAP660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660 2. Configure the settings as explained in the following table: Table 2. Basic general system settings Setting Description Access Point Name This unique name is the wireless access point NetBIOS name. The name is printed on the rear label of the wireless access point. The default is netgearxxxxxx, in which xxxxxx represents the last 6 digits of the wireless access point MAC address. You can replace the default name with a unique name up to 15 characters long. The access point name can be retrieved through SNMP. Country / Region From the Country / Region drop-down list, select the country where the wireless access point is installed. Note: It might not be legal to operate this wireless access point in a region other than one of those identified in this field. 3. Click Apply to save your settings. To configure time settings: 1. Select Configuration > System > Basic > Time. The Time screen displays: Figure 12. 2. Configure the settings as explained in the following table: Table 3. Time system settings Setting Time Zone Current Time Description Select the time zone to match your location. This is a nonconfigurable field that displays the current date and time. Installation and Basic Configuration 24