Netgear WNDAP660 Reference Manual - Page 65
Table 16., SNMP settings, Management and Monitoring
View all Netgear WNDAP660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660 Figure 34. 2. Specify the settings as explained in the following table: Table 16. SNMP settings Setting Description SNMP Select the Enable radio button to allow the SNMP network management software, such as HP OpenView, to manage the wireless access point through SNMPv1/v2 protocol. By default, the Disable radio button is selected. Read-Only Community Name Enter the community string to allow the SNMP manager to read the wireless access point's Management Information Base (MIB) objects. The default is public. Read-Write Community Name Enter the community string to allow the SNMP manager to read and write the wireless access point's MIB objects. The default is private. Trap Community Name Enter the community string to allow the SNMP manager to send traps. The default is trap. IP Address to Receive Traps Enter the IP address of the SNMP manager to receive traps sent from the wireless access point. Trap Port Enter the number of the SNMP manager port to receive traps sent from the wireless access point. The default is 162. 3. Click Apply to save your settings. Management and Monitoring 65