Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 107
Connecting to a PC, Set [PRIORITY MODE] to [REC/PB] or [REC/PB4K].
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Connecting to a PC miniB A USB 2.0 Cable (A-miniB type) (commercially-available) ≥ Insert the plugs as far as they will go. 1 Connect this unit to the AC adaptor. ≥ Use the AC adaptor to free you from worrying about the battery running down. 2 Turn on the unit. 3 Set [PRIORITY MODE] to [REC/PB] or [REC/PB(4K)]. RECORD SETUP] # [PRIORITY MODE] # [REC/PB] or [REC/PB(4K)] 4 Press the MODE button to switch to the Playback Mode. 5 Connect this unit to a PC. ≥ The USB function selection screen will appear. 6 Touch [PC] on the screen of this unit. ≥ This unit is automatically recognized as an external drive of the PC. (l 108) ≥ When you select an option other than [PC], reconnect the USB Cable. ≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on. ≥ This connection cannot be used in the Recording Mode. ≥ A USB 2.0 cable is not supplied with this unit. Please use a commercially available cable compatible with the USB 2.0 standard. Connect the miniB connector to this unit. ≥ When performing reading/writing between a PC and an SD card, be aware that some SD card slots built into PCs and some SD card readers/writers are not compatible with the SDHC Memory Card or SDXC Memory Card. ∫ To disconnect USB Cable safely (For Windows) Select the icon in task tray displayed on the PC, and then select the model number of this unit to disconnect the USB cable. ≥ Depending on your PC's settings, this icon may not be displayed. (For Mac) Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB Cable. About the screen indication of the unit ≥ Do not disconnect the USB Cable, battery, or AC adaptor while the access lamp is on or card access icon ( ) appears on the unit screen. ≥ If the screen does not change when the unit is operated while connected to a PC, disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be destroyed when above operation is performed while accessing the SD card.) - 107 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/107.png)