Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 238
Warning Indications
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Display Warning Indications If a problem is detected immediately after the unit is turned on or while you are operating it, the status indicator and an on-screen display report the problem. System error The battery is depleted (Low input voltage) Low input voltage to the DC input terminal The card is full Status indicator On-screen display Meaning of the warning Recording/playback Solution Status indicator On-screen display Meaning of the warning Recording/playback Solution Status indicator On-screen display Meaning of the warning Recording/playback Solution Status indicator On-screen display Meaning of the warning Recording/playback Solution It flashes once per second. s A reference signal error or communication error has occurred. The operation stops. Turn off and on this unit. If the warning persists, consult your dealer. It flashes once per second. The message [LOW BATTERY.] is displayed. The battery is depleted. The operation stops. This unit turns off automatically. Charge or replace the battery. Connect the AC adaptor to cancel the warning. It flashes once per second. The message [Low DC power] is displayed. The voltage entering the DC input terminal is low. The operation stops. This unit turns off automatically. Attach a charged battery. s The remaining recordable time flashes red when it reaches [R 0h00m]. The SD card capacity is full. The recording stops. Delete unnecessary clips, or use a new SD card. - 238 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/238.png)