Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 152
Image quality, Transmission type, When [SYSTEM FREQ] is set to [50.00Hz]
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
(When [SYSTEM FREQ] is set to [50.00Hz]) Image capture size 3840k2160 1920k1080 1280k720 640k360 Frame rate 25fps 12.5fps 5fps 50fps 5fps, 12.5fps, 25fps 50fps 5fps, 12.5fps, 25fps H.264 bit rate 51200kbps fixed 40960kbps fixed 32768kbps fixed 16384kbps to 24576kbps 1024kbps to 14336kbps 3072kbps to 14336kbps 512kbps to 8192kbps 512kbps to 4096kbps Image quality Select the image quality for H.264 images. Setting value: Motion priority Image quality priority Mode giving priority to image motion. Mode giving priority to image quality. Factory settings: Motion priority ≥ This setting is only enabled when [Transmission priority] is set to [Constant bit rate] or [Best effort]. Transmission type Select the transmission format for H.264 images. Setting value: Unicast port (AUTO) Unicast port (MANUAL) Multicast A maximum of 14 users can access a single Camera Head or Recorder at the same time. When transmitting image/audio from a Camera Head or Recorder, [Unicast port (Image)] and [Unicast port (Audio)] are automatically set. We recommend selecting the [Unicast port (MANUAL)] setting when the port number transmitting the H.264 images does not need to be fixed (e.g., during use within a network). A maximum of 14 users can access a single Camera Head or Recorder at the same time. When transmitting image/audio from a Camera Head or Recorder, it is necessary to set [Unicast port (Image)] and [Unicast port (Audio)] manually. When transmitting H.264 images via the Internet, configure a fixed transmission port for the broadband router (hereafter referred to as "router") (l 167). For details, refer to the operating instructions for the router. An unlimited number of users can access a single camera at the same time. When transmitting H.264 images via multicast, enter the [Multicast address], [Multicast port], and [Multicast TTL/HOPLimit]. Factory settings: Unicast port (AUTO) ≥ For explanation of number of maximum simultaneous access, refer to page 134. - 152 -