Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 223
Peaking Color], Peaking Level], Wfm Type], Wfm Position], Zebra], Zebra Mode], Top/left, Continue
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
[PEAKING COLOR] You can set the peaking color for Focus Assist. (l 52) [Red]/[Blue]/[Yellow]/[White] [PEAKING LEVEL] You can set the peaking strength for Focus Assist. (l 52) ≥ This function's default setting is "0". [WFM] This enables/disables the Wave Form Monitor function. (l 78) [ON]/[OFF] [WFM TYPE] This sets the type of Wave Form Monitor. (l 78) [WAVE]/[VECTOR]/[WAVE/VECTOR] [WFM POSITION] This sets the display positions of Wave Form Monitor. (l 78) [TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT] [ZEBRA] Switch between the zebra display and marker display. [ZEBRA 1]/[ZEBRA 2]*/[OFF] * This cannot be set if [ZEBRA DETECT 2] is set to [OFF]. (l 224) ≥ For information on the zebra display, refer to page 73. [ZEBRA MODE] This sets the display duration of the zebra display. [CONTINUE]: Displays the zebra display until it is switched to another zebra display setting. [MOMENT]: Displays the zebra display for approximately 5 seconds. - 223 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/223.png)