Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 52
Focus Assist, To change the peaking settings
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Focus Assist A color is displayed on the part that is focused when Focus Assist is used. (Peaking display) ≥ Switch to Manual Focus Mode. (l 49) Press the button while pressing and holding the SHIFT button. ≥ Press again to cancel. A: Peaking ∫ To change the peaking settings You can set the peaking color and strength. (When changing the peaking color) Select the menu. DISP SETUP] # [PEAKING COLOR] # desired color [Red]/[Blue]/[Yellow]/[White] (When setting the peaking strength) 1 Select the menu. DISP SETUP] # [PEAKING LEVEL] # desired setting 2 Touch / to adjust settings. ≥ You can select a value between s7 and r7. 3 Touch [EXIT] to complete the setting. ≥ Focus Assist can also be used by pressing the USER button assigned as . (l 66) ≥ Focus Assist is not possible in following cases: j During Recording Check (l 72) j During Freeze Frame (l 70) j When color bars are displayed (l 74) ≥ Focus Assist is canceled in following cases: j If you turn the unit off j When you set this unit to Auto Focus ≥ The peaking display is not displayed on the image that is actually recorded. ≥ The peaking display is not displayed on the external monitor. ≥ Freeze Frame is not available when you use Focus Assist. (l 70) ≥ Peaking may not be displayed when you use Digital Zoom (l 69). - 52 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/52.png)