Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 112
Operation method, Switching between Day and Night mode, Remote camera controller [AW-RP50]
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Operation method For menu operation (Camera Text Menu), refer to page 110. Remote camera controller [AW-RP50] POWER ALARM F1 F2 F1 CAMERA OSD MENU STORE PAGE DELETE 1 2 3 4 5 GAIN/PED R/B GAIN R/B PED AWB/ABB SHUTTER 6 7 8 9 10 DETAIL SCENE/MODE CAMERA SETUP PRESET MEMORY / MENU SYSTEM F2 EXIT USER1 USER2 IRIS AUTO TELE ZOOM WIDE 1 AUTO 2 3 4 5 CAMERA STATUS / SELECTION FOCUS/PUSH OAF LOW HI PTZ/FOCUS SPEED PT ACTIVE A For operating the Camera Text Menus. [CAMERA OSD]: When this is pressed for about 2 seconds, the selected camera menu is displayed, overlapping the camera output image. When it is pressed for about 2 seconds while a menu is displayed, the menu is exited. [F1]: Turn [F1] to move the cursor up and down in the Camera Text Menu or to change setting values. Press [F1] to move to the next level of a menu item or to change a setting value at the lowest level. B For selecting the cameras to be operated. ∫ Switching between Day and Night mode 1 Press the [MENU] button on the AW-RP50. ≥ The [MENU] button lights, and the [PRESET MEMORY/MENU] buttons become selectable. 2 Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area. ≥ The button lights, and the [SETUP] menu appears on the LCD panel. 3 Turn the [F1] dial to select "FUNCTION", then press the [F1] dial. ≥ Press the [EXIT] button if [FUNCTION] is not displayed. 4 Turn the [F1] dial to select "OPTION". ≥ "Off" or "On" appears on the bottom right (F2 area) of the LCD panel. 5 Turn the [F2] dial to select "Off" or "On", then press the [F2] dial. [Off]: [On]: Infrared Recording Mode Off Infrared Recording Mode On ≥ If you operate the [IRIS] dial in Manual Iris Mode, the iris is adjusted, while if you operate the dial in Auto Iris Mode, the setup value of [AE LEVEL] is adjusted. ≥ When one of [IRIS MODE]/[GAIN MODE]/[SHUTTER MODE] is set to [AUTO], even if you adjust the iris/gain/ shutter speed, the brightness may not change. - 112 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/112.png)