Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 162

∫ System settings tab [System] This is the setup menu in which the output image settings of the Camera Head or the unit are configured. ≥ This item's setting is reflected when the [Set] button is pressed. ¥ Others Time Stamp The recording date and time can be recorded superimposed on the image. ≥ Not displayed during SDI Mode. Setting value: Off, On Factory settings: Off ≥ For time stamp, also refer to page 215. CAM/BAR Switch the display mode of the LCD monitor of the unit and the web screen between the color bar display and the image of the Camera Head or the unit. ≥ For information about color bars, refer to page 74. Setting value: Camera, Colorbar Factory settings: Camera Bars Type Change the type of color bar to display. Setting value: Type1, Type2 Factory settings: Type1 Test Tone Volume of the test tone that is output when the color bar is displayed can be adjusted. Setting value: Off, Level1, Level2 Factory settings: Off ≥ For color bar and test tone, also refer to page 74. Recorder ID Sets the recorder ID of this unit. Setting value: 0 to 16 Factory settings: 0 Clip Number Reset Content of the setup is the same as the menu [DISP SETUP] → [CLIP NUMBER RESET] of this unit. (l 228) ≥ Executed when the [Execute] button is clicked. - 162 -