Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 237
During copying between SD cards, THE NUMBER OF CLIPS
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
During copying between SD cards Display Description Behavior and cause Use destination SD card formatted with same as source SD card. This is displayed when the SD card format (FAT32/exFAT)* differs between the SD card of the copy source and that of the copy destination. * FAT32 is a format used for SDHC memory cards. exFAT is a format used for SDXC memory cards. ≥ Check the format of the SD card of the copy destination. CANNOT COPY. This is displayed when the system frequency (59.94 Hz/50.00 Hz) of AVCHD clips differs between those recorded on the SD card of the copy source and those recorded on the SD card of the copy destination. (AVCHD clips with different system frequencies cannot be recorded to the same media.) ≥ Copy the AVCHD clips to a recordable SD card. Use an SD card containing clips with the same system frequency. Exceeds capacity. Please There is not enough space on the SD reselect. card. ≥ Replace the SD card of the copy destination or delete unnecessary clips. This clip cannot be copied. This is displayed when one or more of the clips you are trying to copy cannot be played back on this unit. ≥ Copy clips except for the ones that cannot be copied. Cannot copy: contains recordings from other devices. This is displayed when a copy-related operation involving a clip recorded with another device is performed. ≥ Copy only the clips recorded with this unit. CANNOT SELECT BY DATE ANY MORE. This is displayed when no more clips can be selected after the maximum limit is reached, for example. ≥ After finishing copying, reselect the desired dates. CANNOT COPY - DATE CAPACITY IS FULL. CANNOT COPY - THE NUMBER OF CLIPS HAS REACHED MAXIMUM. This is displayed when no more clips can be copied after the maximum limit set by applicable standards is reached, for example. ≥ Use an SD card with enough recordable space. Could not copy some clips. This is displayed when some clips cannot be copied after the maximum limit set by applicable standards is reached, for example. COPY FAILED. PLEASE CHECK THE CARD. COPY FAILED DUE TO ERROR ON SD CARD. An error has occurred while accessing the SD card. This is displayed when an attempt to access the SD card in this unit fails. ≥ Check the SD card. CARD LOCKED. The write-protect switch of the copy destination SD card is locked. ≥ Unlock the write-protect switch of the SD card. - 237 -