Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 246
Playback, With other products, With a PC, Others, When the USB Cable is
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
∫ Playback Problem Clips/still pictures cannot be played back. Clips/still pictures cannot be deleted. ∫ With other products Problem Although this unit is correctly connected to an external monitor, images cannot be seen. The images are squeezed horizontally. Even when this unit is connected to the external monitor by the HDMI cable, images or sounds are not output. If the SD card is inserted in another device, it is not recognized. Check points ≥ Any clips/still pictures where the thumbnails are displayed as cannot be played back. ≥ In most cases, is displayed for the following clips: j Clips recorded with another device or edited with editing software j Clips with damaged data ≥ The thumbnails of clips with different system frequencies are indicated with . You can play them back by changing the [SYSTEM FREQ] setting. (l 41) ≥ Release the protect setting. (l 91) ≥ It may not be possible to delete the following clips/still pictures: j any clips/still pictures where the thumbnails are displayed as If the clips/still pictures are unnecessary, format the SD card to erase the data. (l 41) Please be aware that if a SD card is formatted then all the data recorded on the SD card is erased and cannot be recovered. Back up important data on a PC etc. Check points ≥ Please read the operating instructions of your external monitor and select the channel that matches the input used for the connection. ≥ Change the setting of the unit depending on the cable connecting to the external monitor. (l 97) ≥ Check if the HDMI cable is connected correctly. ≥ Insert the HDMI cable all the way in. ≥ Check what signals are supported by the HDMI monitor. ≥ Check that the device is compatible with the capacity or type of SD card (SDHC Memory Card/SDXC Memory Card) that you inserted. Refer to the operating instructions of the device for details. ∫ With a PC Problem When connected by the USB Cable, this unit is not detected by the PC. When the USB Cable is disconnected, an error message will appear on the PC. Check points ≥ After re-inserting the SD card into the unit, reconnect the USB Cable. ≥ Select another USB terminal on the PC. ≥ Check the operating environment. (l 106) ≥ Connect the USB Cable again after restarting the PC and turning on this unit again. ≥ To disconnect the USB Cable safely, double-click the tray and follow the instructions on the screen. icon in the task ∫ Others Problem If the SD card is inserted in this unit, it is not recognized. Check points ≥ If the SD card is formatted on a PC, it may not be recognized by this unit. Use this unit to format SD cards. (l 41) - 246 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/246.png)