Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 215
Auto Rec Input], Media Select], Pre-rec], Time Stamp], Recorder Id], Touch [recorder Id]., Touch
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
[AUTO REC INPUT] This unit can start/stop recording automatically following the AUTO REC signal input from the camera recorder connected to the SDI IN terminal. (l 82) [OFF]/[TYPE1]/[TYPE2]/[TYPE3] [MEDIA SELECT] Card slot can be selected separately to record motion pictures. (l 41) [SD CARD 1]/[SD CARD 2] [PRE-REC] Image and audio before pressing the REC/PAUSE button is recorded. AVCHD clips will record from approximately 3 seconds before, and MP4 clips will record from approximately 4 seconds before. (l 71) [ON]/[OFF] [TIME STAMP] You can stamp the date and time of recording on the images you record. [ON]/[OFF] ≥ appears on the screen. ≥ The format of the recording date and time varies depending on the settings of [DATE/TIME] and [DATE FORMAT]. (l 225) ≥ The month of the date and time of recording is recorded in English. ≥ In the following cases, even when [TIME STAMP] is set to [ON], the time stamp function cannot be enabled. j When [DATE/TIME] is set to [OFF] j During Freeze Frame (l 70) ≥ The date and time of recording displayed during [TIME STAMP] recording and the date and time displayed during the playback of the image may not exactly be the same. [RECORDER ID] This sets the recorder ID for this unit. 1 Touch [RECORDER ID]. 2 Touch / to change the Camera Number. ≥ Numbers between 0 and 16 can be set. 3 Touch [RETURN]. ≥ Touch [EXIT] to exit the menu screen. ≥ This function's default setting is "0". - 215 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/215.png)