Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 96

About SDI input signal format SDI input signal format A is displayed in the screen of this unit during SDI Mode. It may not be possible to set [REC FORMAT] depending on the signal format. ≥ For setup of [REC FORMAT], refer to page 213. ≥ Confirm that this unit and the SDI output device is correctly connected and the setup of the signal format for the SDI output device is correct when one of the following messages is displayed. j [INVALID SDI INPUT FORMAT. PLEASE CHANGE RECORD FORMAT.] j [INVALID SDI INPUT FORMAT. PLEASE CHANGE IP FORMAT.] j [UNDELIVERABLE FORMAT.] j [INVALID SDI INPUT.]  SDI IN 1080/59.94i ∫ SDI signal format that can be input SDI output of the SDI output device 3G-SDI HD-SDI Signal format 1920k1080/59.94p/50.00p 1920k1080/59.94i/50.00i/29.97PsF/23.98PsF/25.00PsF/1280k720/59.94p/50.00p ∫ SDI signal format that is compatible to the recording format of this unit Recording format PS 1080/59.94p PS 1080/50.00p PH 1080/59.94i, HA 1080/59.94i, HE 1080/59.94i PH 1080/23.98p PH 1080/50.00i, HA 1080/50.00i, HE 1080/50.00i PH 1080/59.94i FROM 720p, HA 1080/59.94i FROM 720p, HE 1080/59.94i FROM 720p PH 720/59.94p, PM 720/59.94p PH 1080/50.00i FROM 720p, HA 1080/50.00i FROM 720p, HE 1080/50.00i FROM 720p PH 720/50.00p, PM 720/50.00p Signal format 1920k1080/59.94p 1920k1080/50.00p 1920k1080/59.94i, 1920k1080/29.97PsF 1920k1080/23.98PsF 1920k1080/50.00i, 1920k1080/25.00PsF 1280k720/59.94p 1280k720/50.00p ≥ Do not input an irregular signal or a signal with continuous disruption. This may cause the device to restart or operate erratically. ≥ Start recording after confirming that an image signal is input. Recording cannot be started if there is no image signal. ≥ Do not stop the signal being output to the external device or disconnect the cable during recording. This may cause the clip to split up or prevent the recording from resuming. - 96 -