Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 31

Preparation Input SDI to this unit (SDI Mode)   HD SDI IN  A Camera recorder (SDI output device) B SDI OUT terminal C BNC cable (commercially-available) Connect the SDI output device to this unit with a BNC cable. ≥ Use the 5C-FB compatible double shielded cable for the BNC cable (commercially available product) to connect to the SDI IN terminal and the SDI OUT terminal. ≥ This unit will start up in the SDI Mode when it is turned on as follows. j When the power button is pressed and held for 2 seconds or longer when the Camera Head is not connected (l 32) j When the power button is pressed and held for 2 seconds or longer while the USER1 button is pressed and held ∫ Functions that cannot be set in the SDI Mode The following functions cannot be set on this unit in the SDI Mode. Set on the SDI output device side. j Switching Recording Mode (l 44) j Adjustment of picture quality (l 45) j Zoom (l 47) j Image stabilization (l 48) j Focus (l 49) j White balance (l 53) j Iris (l 55) j Gain (l 57) j Shutter speed (l 59) ≥ There are other USER button functions and menus that cannot be used in the SDI Mode. For details, refer to the following pages. j Functions of the USER button (l 68) j Using the SHIFT button (l 77) j Menu structure (l 195) - 31 -