Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 15

∫ For the purposes of these operating instructions ≥ The battery pack is referred to as the "Battery". ≥ SDHC Memory Card and SDXC Memory Card are referred to as the "SD card". ≥ Function that can be used for CAM Mode: Function that can be used for SDI Mode: SDI Function that can be used for Playback Mode: ≥ An image created by one recording operation is called a "Clip" and is described as such. ≥ The Compact Camera Head (AG-MDC20G) sold separately is described as "Camera Head". ≥ Clip(s) to be recorded or that was recorded with [PRIORITY MODE] set to [REC/PB(4K)] →"MP4 clip(s)" ≥ Clip(s) to be recorded or that was recorded with [PRIORITY MODE] set to [REC/PB] →"AVCHD clip(s)" ≥ Notation of < > indicates the setup item name of the USER button that can be set with the menu of [USER SW]→[USER1] to [USER13]. ≥ Pages for reference are indicated by an arrow, for example: l 00 ≥ For the purposes of this manual, the model numbers of the units are given as listed in the table below. Model number of unit AG-MDR25P AG-MDR25E AW-RP50N AW-RP120G AK-HRP200G Model number given in manual AG-MDR25 AW-RP50 AW-RP120 AK-HRP200 ≥ Functions which can be used by Windows only are indicated using the mark. ≥ These operating instructions are designed for use with models AG-MDR25P/AG-MDR25E. The illustrations and screen examples used in this document are of the AG-MDR25P. ∫ About Condensation (When the lens of the Camera Head or the LCD monitor of this unit becomes cloudy) Condensation occurs when there is a change in temperature or humidity, such as when the unit is taken from outside or a cold room to a warm room. Please be careful, as it may cause the lens, the viewfinder or LCD monitor to become soiled, moldy, or damaged. When taking the unit to a place which has a different temperature, if the unit is accustomed to the room temperature of the destination for about one hour, condensation can be prevented. (When the difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the bag, and seal the bag.) When condensation has occurred, remove the battery and/or the AC adaptor and leave the unit like that for about one hour. When the unit becomes accustomed to the surrounding temperature, fogginess will disappear naturally. - 15 -