Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 143

Setup from the web screen ∫ About the backup function for each setup item The following setup items that can be set with web screen will maintain separate setup values for CAM Mode and SDI Mode. ≥ [Display] under the Clock setting tab [Date&Time] (l 145) ≥ All setup items under the Live page tab [Live page] (l 146) ≥ All setup items under the IP video settings tab [Video over IP] (l 149) ≥ [Audio Transmission] (l 155) and [Audio bit rate] (l 155) under the Audio tab [Audio] ≥ All setup items under the Multi screen setup tab [Multi- screen setup] (l 164) ≥ All setup items under the User authentication settings tab [User auth.] (l 165) ≥ All setup items under the Network setup tab [Network] (l 167) ≥ All setup items under the Advanced network setting tab [Advanced] (l 170) Logging into the Web setup screen [Setup] 1 Turn on the power of the unit from the standby mode state. 2 Click the [Setup] A button. (l 134) A login screen is displayed.  3 Enter the user name and password. The factory settings for the user name and password are as follows. User name admin Password 12345 4 Click the [OK] button. Click [OK] again when the following screen appears. ≥ While the initial settings remain used for the user name and password, a message prompting the user to change the user name and password is displayed after authorization. In order to ensure security, be sure to change both the user name and password. It is also recommended that the password be changed at regular intervals. ≥ During Standby mode, the [Setup] button is disabled, and you cannot switch to the web setup screen [Setup]. - 143 -