Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 65

Setting the User Information Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as dates, control numbers, etc., into the User Information. UB 00 00 00 00 ≥ This is displayed only when [PRIORITY MODE] is set to [REC/PB] or [IP]. (l 33) [UB PRESET] You can set the User Information. ≥ Set [PRIORITY MODE] to [REC/PB] or [IP]. (l 33) 1 Select the menu. TC/UB SETUP] # [UB PRESET] 2 Touch the item to set and change with / . ≥ You can use numbers from 0 to 9 and letters from A to F. ≥ It will be set to "00 00 00 00" when [Reset] is touched. 3 Touch [EXIT] to complete the setting. ≥ When [PRIORITY MODE] is set to [IP(4K)] or [REC/PB(4K)], the [UB PRESET] setting can be changed, but the changed setting cannot be used. Setting the Recording Counter Recording Counter will display the recording time in seconds. 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL])) CLP 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [CLIP])) [REC COUNTER] Select the counting method during the recording. Select the menu. DISP SETUP] # [REC COUNTER] # desired setting [TOTAL]: The count continues to increase until the Recording Counter is reset. [CLIP]: Resets the Recording Counter at start of recording. Counts the time of each recording session. To reset the Recording Counter for the Recording Mode Recording counter will be set to "0:00:00" when the USER button assigned as is pressed or the USER icon is touched while displaying the counter. ≥ Please refer to page 66 for details about setting the USER button. - 65 -