Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 164

Multi screen setup screen [Multi-screen] The Camera Heads or the units whose images are to be displayed on the multi screen are set here. ∫ Multi screen setup tab [Multi-screen setup] This item's setting is reflected when the [Set] button is pressed. IP address Enter the IP address or the host name of the Camera Head or the unit whose image is to be displayed on the multi screen. With one group consisting of 4 cameras, up to four groups of cameras (a total of 16 cameras) can be registered. Enter as follows if the HTTP port number has been changed. Example of input http://192.168.0.10:8080 Enter the following when connecting via HTTPS. Example of input https://192.168.0.10/ Maximum number of characters 1 to 128 half-size characters Factory settings: Cam. 1 to Cam. 16: blank ≥ When connecting via HTTPS, install the security certificate for the Camera Head or the unit to be displayed. (l 181) ≥ When configuring a host name, the DNS settings of the personal computer that will display the multi screen must be configured. For details on the personal computer's DNS settings, consult your network administrator. Camera title Enter the title of the Camera Head or the unit. The camera title which has been input is displayed on the multi screen. ≥ You can enter between 0 to 20 half-size characters. ≥ The following characters can be displayed. Half-size numeric characters 0123456789 Half-size alphabetical characters (upper and lower cases) ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz Symbols Factory settings: Cam. 1 to Cam. 16: blank ≥ When a 16-screen multi screen is selected, camera titles may be only partially displayed. ≥ Multi screen displays are displayed in 4:3 aspect ratio. - 164 -