Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 186
Reset settings tab [Default reset], Reset to the default Except the network
![]() |
View all Panasonic AG-MDC20GJ / AG-MDR25PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
∫ Status confirmation tab [Status] Confirm the status of the unit. ¥ UPnP Port number(HTTP) Displays the port number configured via UPnP port forwarding. Status Displays the port forwarding status. Port number(HTTPS) Displays the port number configured via UPnP port forwarding. Status Displays the port forwarding status. Router global address Displays the global address of the router. ∫ Reset settings tab [Default reset] The unit's setting data is initialized and the unit is restarted on this screen. Reset to the default (Except the network settings) The setup content of this unit is reset to the initial setup, and this unit is rebooted by clicking on the [Execute] button. However, the following setup contents are not initialized. ≥ All the settings under [Setup] → [Basic] → [Date&Time] ≥ All the settings under [Setup] → [Multi-screen] ≥ All the settings under [Setup] → [User mng.] ≥ All the settings under [Setup] → [Network] ≥ All the settings under [Setup] → [Maintenance] ≥ Setup of [SYSTEM FREQ] and [LANGUAGE] ≥ Setup of [SCENE FILE] (only during SDI Mode) When the initialization operation is started, no operations can be undertaken for about 1 minute. Reboot When the [Execute] button is clicked, the unit is rebooted. After the unit has been rebooted, no operations can be undertaken for about 1 minute as is the case when the unit's power is turned on. - 186 -
![](/manual_guide/products/panasonic-agmdc20gj-agmdr25pj-agmdr25-camera-recorder-operating-instructions-61315ec/186.png)