Panasonic AG-MDC20GJ / AG-MDR25PJ AG-MDR25 Camera Recorder Operating Instructi - Page 63

Recording Counter display You can change a counter display that indicates how much time has elapsed during recording or playback. Switch the counter display by pressing the USER button assigned as , or touching the USER button icon. ≥ Please refer to page 66 for details about setting the USER button. ≥ The display will be switched in the following order: TC # UB* # Recording Counter # Off. Counter display Indications TC (Time Code) UB (User Information)* (l 65) TC 00:00:00:00 or TC 00:00:00.00 ≥ Display will change depending on the setting of the [DF MODE]. (l 64) UB 00 00 00 00 REC COUNTER (Recording Counter) (l 65) (In Recording Mode) 0:00:00 or CLP 0:00:00 (In Playback Mode) CLP 0:00:00 ≥ The display format used in Recording Mode is determined by the [REC COUNTER] setting. ≥ In Playback Mode, the counter is reset to [CLP 0:00:00] for every clip. * This is displayed only when [PRIORITY MODE] is set to [REC/PB] or [IP]. (l 33) ≥ It is also possible to switch the counter display by the menu setup. [DISP SETUP] # [COUNTER] Setting the Time Code Time code will display the recording time in hours, minutes, seconds, and frames. TC 00:00:00:00 (hour: minute: second: frame [NDF]) TC 00:00:00.00 (hour: minute: second. frame [DF]) ≥ The number of frames (frame count per second) varies depending on the frame rate in [REC FORMAT]. (l 213) Frame rates 59.94p/59.94i/29.97p 50.00p/50.00i/25.00p 23.98p Frame 0 to 29 0 to 24 0 to 23 - 63 -